![](/alumina-ceramics/2021/08/25/fuse-ceramics-2.jpg?imageView2/2/format/jp2)
The reasons why the ceramic ignition needle of the cooker is always broken:
The position of the ignition needle is too high, so that the flame can burn the needle body porcelain column of the ignition needle, causing it to break prematurely;
The ignition needle is often dripped with oil, etc., which causes it to burn and cause premature damage;
The joint between the ignition needle and the high-voltage line is not fastened with fire-resistant and flame-retardant materials, resulting in frequent damage and separation of the ignition needle and the high-voltage line;
During daily cleaning, inadvertently causing its collision and displacement or sudden heating after being soaked in fire leads to premature green cracks;
The material of the ignition needle is not good enough and the quality is poor, which leads to frequent high temperature damage.
The corresponding solutions for the above situation:
Carefully adjust the position of the ignition needle to ensure that it can be ignited normally without being directly burned by the flame (needle body porcelain column);
Always keep the ignition needle clean to remove oil and other dirt;
Fix the connection between the ignition needle and the high-voltage line with fire-retardant materials such as asbestos pipe;
When cleaning daily, be careful not to collide with the ignition needle and the induction needle, or cause them to break;
When replacing the ceramic ignition needle, be sure to choose regular accessories with good quality to ensure that it can be used for a long time.